Micro Motion RFT9709 Instrukcja Obsługi Pobierz pdf (Strona 186)

172

Using ProLink

Software with Micro Motion

Transmitters

Uploading and Downloading Configuration Files with a Model 268

continued

Uploading files

To switch to HART protocol (required by the Model 268):

1. Run the ProLink setup program as instructed in

Chapter 2

(page 5).

2. Follow the on-screen instructions to switch from Modbus to HART

protocol.

3. After switching to HART protocol:

a. If the CONFIG.SYS file was copied into the ProLink directory,

copy it back into the root directory.

b. Reboot the computer to activate changes made to the

CONFIG.SYS file.

To choose 1200 baud and the HART primary master type (required

by the Model 268):

1. Open the File menu, then choose Communication Options.

2. At the Configure Communications dialog box:

a. Open the Baud Rate list box and select 1200 baud.

b. Select HART Primary.

c. Click OK.

To upload the Model 268 with a configuration file:

1. Use the Transmitter Database dialog box to select the desired

transmitter configuration file.

2. To avoid "locking up" the personal computer, make sure to connect

the Model 268 to the PC Interface adaptor, then choose Upload. The

Upload to 268 dialog box appears as shown in

Figure B-1

1 2 ... 181 182 183 184 185 186 187 188 189 190 191 ... 213 214

Brak uwag

Micro Motion RFT9709 Instrukcja Obsługi Strona 186